Description
These consist of two cables. One has the thermistor and a black locking connector. The other has the mating locking connector and the white board connector. Together they are about the same length as the heated bed cable. They will work on the Gantry, the Gantry Pro and the Gantry S, as well as any printer using the standard 100Kohm thermistor. To use, you simply tape the thermistor to the underside of the bed, plug the white connector to the main PCB in place of the original, and wire tie the wire to the existing bed cable. No need to remove the original thermistor. No soldering. The black locking connector provides a disconnection point inline with the cable.
Reviews
There are no reviews yet.